Testmech

Requires for construction Exosuit general information

Raw materials:
100.000 (Metal sheets)
7.500 (Glass)

Parts, materials, circuits:

10 x Metal rods,
5 x Metal sheets,
1 x Cable coil,
1 x Scanning Module,
1 x Capacitor,
1 x Power cell,
2 x Ripley circuit boards.

Production notes

For circuits production check Robotics' Circuit Imprinter and Cargo.
For any other part of this list, check Protolathe (any, R&D's or others).
Metal rods can be handcrafted from Metal sheets.

Tools: , , , (need 2 units of welding fuel from fuel tank ), .

Integrity

200

Techtree node

EXOSUIT: Ripley (Available at round-start)

Equipment slots 6 Movement speed Fast (in normal pressure (>50 kPa) — 0,2 sec. delay per move, overwise — 0,15 sec.)

Upgradable parts

Scanning Module	Responsible for power consumption (In watts).
	None*
Walking	`500`	`15`	`10`	`5`	`0`
Melee attack	`15`
Capacitor	Responsible for EMP (energy) damage resistance.
	None*
	`20%`	`25%`	`30%`	`35%`	`40%`
Power cell	Responsible for power capacity (in kW).
					Bluespace Power Cell (40 kW)
	`1`	`10`	`20`	`30`	`40`

* Movement and other actions may not be possible without this stock parts.

Special abilities

Moves and drills even faster in low pressure environments (like Lavaland, space, etc.).
Armor can be upgraded with Goliath plates (melee +10% ballistic +5% laser +5%).

Description

The Ripley APLU (Autonomous Power Loading Unit) is a low-tech exosuit with high moving speed and no atmospheric protection. Don't expect the wire screen to do much against ranged weapons. Useful for carrying boxes and as a lightweight platform for various exosuit tools. While it lacks the Firefigher's lavaproofing and improved armor, the Ripley APLU can still go toe to toe with Lavaland mobs thanks to its good melee protection.

Note about temperature: The exosuit itself can withstand decently high temperatures without taking damage. However, it does not offer protection to the pilot from fire or temperature hazards.

Armor information

Melee	Ballistic	Laser	Energy	Bomb	Biological	Fire	Acid	Wounds	Max temperature
`40%`	`20%`	`10%`	`20%`	`40%`	None	Fully proofed	Fully proofed	None	`20.000`°K

Construction steps

1) Build all of the Ripley parts using the Exosuit Fabricator:	, , , , ;
2) Attach all of the parts to the Ripley chassis:	;
3) Exosuit chassis construction:	3.1) Use , use , add (1 piece of Cable Coil), use ;
4) Circuit boards:	4.1) Add (Ripley Central Control Module), use ;	4.2) Add (Ripley Peripherals Control Module), use ;
5) Stock parts:	5.1) Add (Scanning Module), use ;	5.2) Add (Capacitor), use ;	5.3) Add(Power cell), use ;
6) Materials:	6.1) Add (5 pieces of Metal sheets), use , use (on);	6.2) Add (5 pieces of Metal rods), use (on).